6mm Aluminum Foil Butyl Sound Deadening With Car Sound Insulation Material

Product Description:

WanTai sandwich sound deadening is made up of three layers, 1.5mm thickness butyl and 0.05mm thickness aluminum and 4mm thickness acoustic foam. it can attenuate the low frequency greatly and isolate the vibration from the road and the engine.

Triple parts products: 3 effects

1. Viscoelastic absorption
absorbs the metallic resonance of the door

2. Aluminum

less more road noise
3. Acoustic foam
cancels the harmonic distortions by the absorption of a part of the back wave

The superb flexibility of this material allows for use on complex surfaces while providing the maximum vibration damping for material of this kind and doubles up as a sealant. This material is best suited for areas with low amounts of vibrations. This material is water-proof and once applied provides good defense against corrosion preventing any water and oxygen from coming in contact with chassis.

Features:

• Use for floor, door,trunk,
stereo enclosures, under dash,
inner firewall and etc

• Easy-to-install, very high-strength
adhesive butyl rubber

• Eliminate body/floor vibration

• Better audio sound quality

Installation:

1.Clean up the mounting surface, like the hood, trunk, floor, (for door and roof , need to remove the door panel, roof panel) with a quick-drying and residue-free solvent. Remove all dust, dirt, oil, moisture etc.

2.Use scissors, knife or die to cut the mat to the desired size and shape before removing the release liner.

( Note: work gloves should be used when handle foil backed material because the sharp edges when cut to different size)